-
Vendor:
3736 Steering blocks, left & right (2) (requires 5x11x4mm bearings)
Regular price $3.00 USDRegular priceUnit price per -
Vendor:
3739 Screw pin set (Rustler®, Bandit®, Stampede®)
Regular price $4.50 USDRegular priceUnit price per -
Vendor:
Traxxas Spur gear, 86-tooth (48-pitch) (for models with Torque-Control slipper clutch)
Regular price $3.00 USDRegular priceUnit price perSold out -
Vendor:
3640 Suspension screw pin set, steel (hex drive)
Regular price $4.50 USDRegular priceUnit price perSold out -
Vendor:
2742X Rod Ends, short (6)/ hollow balls (6)
Regular price $4.00 USDRegular priceUnit price per -
Vendor:
3744 Servo saver w/adapters
Regular price $4.00 USDRegular priceUnit price per -
Vendor:
5525R Rod ends, heavy duty (Jato/Slayer) (8)
Regular price $4.00 USDRegular priceUnit price per -
Vendor:
2530 Bulkhead (front) (black)
Regular price $6.00 USDRegular priceUnit price perSold out -
Vendor:
1664 Shock shafts, steel, chrome finish (long) (2)
Regular price $3.00 USDRegular priceUnit price per -
Vendor:
Tie bar, fiberglass
Regular price $4.00 USDRegular priceUnit price per -
Vendor:
2382Planet gears (4)/ planet shafts (4)/ sun gears (2)/sun gear alignment shaft (1) all hardened steel
Regular price $6.00 USDRegular priceUnit price per -
Vendor:
3638 Shock tower (rear)
Regular price $4.50 USDRegular priceUnit price perSold out -
Vendor:
Traxxas 3678A Wheelie bar, assembled (green) (fits Slash, Bandit, Rustler, Stampede series)
Regular price $15.00 USDRegular priceUnit price perSold out -
Vendor:
Front Bearing Carriers, for Slash 2wd, Nitro Slash, e-Rustler & e-Stampede 2wd, Black
Regular price $8.95 USDRegular priceUnit price per -
Vendor:
4628R Differential output yokes, black (2)/ 3x5mm countersunk screws (2)/ screw pin (2)
Regular price $4.00 USDRegular priceUnit price perSold out -
Vendor:
Traxxas 2668 Spring retainers, upper & lower (2)/ spring pre-load spacers: 1mm (4)/ 1.5mm (2)/ 2mm (2)/ 4mm (2)/ 8mm (2) (Big Bore Shocks)
Regular price $5.50 USDRegular priceUnit price per -
Vendor:
ST Racing Concepts 17mm Hex Hub Conversion Kit (Blue)
Regular price $32.00 USDRegular priceUnit price perSold out -
Vendor:
Steering blocks (l&r)
Regular price $3.00 USDRegular priceUnit price per -
Vendor:
Traxxas 2660 Big Bore shocks (long) (hard-anodized & PTFE-coated T6 aluminum) (assembled with TiN shafts) w/o springs (front) (2)
Regular price $30.00 USDRegular priceUnit price per -
Vendor:
3677A Wheelie bar mount (1) / hardware (green)
Regular price $4.00 USDRegular priceUnit price per -
Vendor:
3740 Suspension pins, 2.5x29mm (king pins) w/ e-clips (2) (strengthens caster blocks)
Regular price $2.50 USDRegular priceUnit price per -
Vendor:
3677P Wheelie bar mount (1) / hardware (pink)
Regular price $4.00 USDRegular priceUnit price per -
Vendor:
5185 Tires, rubber (2) (fits Traxxas® wheelie bar wheels)
Regular price $7.00 USDRegular priceUnit price per -
Vendor:
2388X Planetary gear differential with steel ring gear (complete) (fits Bandit, Stampede, Rustler)
Regular price $15.00 USDRegular priceUnit price per