Heavy duty steel top shaft replacement for the 2wd Slash based drag cars for use with DR10 slipper sets or Exotek MK #2012 #2015 slipper sets or Exotek #1942 slipper eliminator.

1 piece no-pin constructions, for maximum reliability but still only 12.5gr ea.

Not compatible with the stock Slash slipper. 

To use the DR10 slipper you will need;

1x Team Associated Octalock 48P Spur Gear

1x ASC 7485

1x Exotek #2012

1x ASC 9739 or similar

1x ASC91423 or similar

1x M4 lock nut

Use this for slipper tightening instructions- https://img2.associatedelectrics.com/pdf/cars_and_trucks/DR10/RTR/70025-70026_DR10-manual.pdf

To use the Exotek Slipper you will need;

1x Team Associated Octalock 48P Spur Gear

1x Exotek #2009 or #2015

1x Exotek #2012

1x ASC9739 or similar

1x ASC91423  or similar

1x M4 lock nut

Use this for slipper tightening instructions- https://img2.associatedelectrics.com/pdf/cars_and_trucks/DR10/RTR/70025-70026_DR10-manual.pdf

To use the DR10 slipper eliminator you will need;

1x Exotek #1942

1x Kimbrough or Exotek Flite 48pitch spur gears.

1x M4 locknut

Compatible with the 2wd Slash stock gear box, Proline Pro transmission or RPM Slash Case.

NOTE- you must use gear grease (tacky) to help protect the idler gear from wearing out.